Loading ...
Loading ...
Loading ...
2.4 Installation of Type IV Camera
2.4.1 Ceiling Mounting Without Junction Box
Steps:
1. Loosen the set screw.
2. Rotate the camera to align the triangle mark with
the screw hole, and dissemble the camera.
Triangle
Mark
Figure 2-23 Dissemble the Camera
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-24 Drill Template
5. Use three PA4 × 25 screws (supplied) to secure the
base to the ceiling.
Figure 2-25 Secure the Base to the Ceiling
6. Align the screw hole with the triangle mark to install
the camera back to the base and secure it.
Triangle
Mark
Loading ...
Loading ...
Loading ...