Loading ...
Loading ...
Loading ...
A->B: Only the object crossing the conī®gured line from the A side to the B side
can be detected.
B->A: Only the object crossing the conī®gured line from the B side to the A side
can be detected.
Sensiīvity It stands for the percentage of the body part of an acceptable target that goes
across the pre-deī®ned line. Sensiīvity = 100 - S1/ST Ć 100. S1 stands for the
target body part that goes across the pre-deī®ned line. ST stands for the
complete target body. The higher the value of sensiīvity is, the more easily the
alarm can be triggered.
Detecīon
Target
Human and vehicle are available. If the detecīon target is not selected, all the
detected targets will be reported, including the human and vehicle.
Target
Validity
If you set a higher validity, the required target features should be more
obvious, and the alarm accuracy would be higher. The target with less obvious
features would be missing.
Figure 6-4 Set Rule
6.
Opīonal: You can set the parameters of mulīple areas by repeaīng the above steps.
7.
For the arming schedule seī«ngs, refer to
Set Arming Schedule . For the linkage method seī«ngs,
refer to Linkage Method Seī«ngs .
8.
Click Save.
Network Camera User Manual
47
Loading ...
Loading ...
Loading ...