Loading ...
Loading ...
Loading ...
WARNING!
• Theanti-tippingbracketmustbemountedto
prevent the appliance from tipping when the
fully stocked door is opened.
• Besurethatthereisnoplumbingor
electrical wiring located in this area which
screws or drills could damage.
Mounting the Anti-Tipping Device
1. Remove the anti-tipping bracket. The screws are no
longer needed.
Anti-Tipping Device
2. Mark a centerline on the back
wall.
3. Position the anti-tipping brack-
et at the stated height and
align with the centerline.
4. Fasten the anti-tipping bracket
through the outer left and
right and any other hole using
the eight screws 6 x 60 pro-
vided.
Use appropriate anchors for
concrete walls.
9
2.
3.
4.
4.
1.
1.
B
lockIng
for
S
afety
The anti-tipping device is mounted on the back wall in
the recess at the finished installation height. After the
appliance is in the recess and raised in height, the hook
of the bracket will connect with the appliance top and
prevent tipping.
The anti-tipping bracket is ajustable in its depth. It is
preset for use in a recess with a depth of 24".
Adjustment of the anti-tipping bracket for use in a
25" deep recess
Both base parts of the bracket must
be adjusted for use in a recess
with a depth of 25".
- Loosen the screws.
- Move the base part back
or forth.
- Tighten the screws.
Adjustment for 5/8"
door panels
Adjustment for 3/4" door
panels
If the recess is deeper than 25", a spacer must be
mounted between bracket and wall.
3.
Loading ...
Loading ...
Loading ...