Loading ...
Loading ...
Loading ...
12
OPERATING INSTRUCTIONS
HOW TO USE THE ICE MAKER
The ice maker completes a batch of ice in less than 10 minutes and is equipped with
an attachable handle for easy portability, creating a quick and convenient ice-making
experience.
1. Make sure the drain plug is closed. If it is not, push it firmly into place.
2. Set the ice maker on a hard, level surface away from any sources of heat. Leave
at least 6 inches of clearance on all sides of the unit for proper ventilation. NOTE:
If the ice maker has been moved since its last use, let it sit for 30 minutes before
plugging it in, to allow the refrigerant fluid to settle.
3. Plug the power cord into a grounded outlet. The unit will enter standby mode with
the LARGE indicator light blinking and the ICE indicator o, signaling that the unit
is plugged in but not yet in ice-making mode.
4. Fill the water reservoir: Open the front cover and gently lift out the ice basket. Fill
the reservoir with filtered or bottled water up to but not exceeding the MAX fill
line. To ensure sanitation, change the water in the reservoir once a day. CAUTION:
Only use cold to room temperature water. Hot water can damage the ice maker.
5. Replace the ice basket and close the front cover.
6. Start the ice maker: Press the SELECT button to choose the desired ice size
(small or large) and the indicator light for the selected size will illuminate. Press
the START-STOP button. The ICE indicator light will illuminate, indicating that ice-
making has started and the unit is no longer in standby mode. NOTE: The ice size
can be changed while ice-making is underway. Simply press SELECT to choose a
dierent size.
Loading ...
Loading ...
Loading ...