Loading ...
Loading ...
Loading ...
Figure 2-17 Secure Base to Ceiling
6. Align the notch with the mark to install the camera
back to the base and secure it.
Figure 2-18 Install Camera Back
7. Connect the cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
Rotation Position
[0° to 360°]
Tilt Position
[0° to 75°]
Pan Position
[0° to 360°]
Figure 2-19 3-Axis Adjustment
4). Rotate the enclosure to adjust the pan position
[0° to 360°].
5). Move the main body up and down to adjust the
tilt position [0° to 75°].
6). Rotate the main body to adjust the rotation
position [0° to 360°].
2.3.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Loosen screws to take apart the junction box.
2. Paste the drill template for junction box to the place
where you want to install the camera.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
four PA4 × 25 screws.
Junction Box Body
Figure 2-20 Secure Junction Box Body
Loading ...
Loading ...
Loading ...