Hikvision DS-2TD2617B-6\/PA Thermal Camera User Manual

Loading ...

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual

Figure 9-13 Fire Source Detection

3. Check the checkbox of Enable Dynamic Fire Source Detection to enable the fire

detection function.

4. Select detection mode from the dropdown list. Smoking Mode and Dynamic Fire

are selectable. Smoking mode is used to detect smoking behavior and the

dynamic fire detection mode is used to detect the fire source.

5. Check the checkbox of Display Fire Source Frame on Stream to display a red

frame around the fire source on stream when fire occurs. (Optional)

6. You can drag the slider to adjust the sensitivity degree of dynamic fire source

detection from 1 to 10. The bigger the number is, the more sensitive the

detecting would be.

7. Click Arming Schedule to set the arming schedule for the fire detection. Refer to

Task 2: Set the Arming Schedule for Motion Detection in Section 9.1.1.

8. Click Linkage Method and check the checkbox to select the linkage method taken

for the fire detection. Refer to Task 3: Set the Linkage Method for Motion

Detection in Section 9.1.1 for detailed steps.

9. Click Save to save the settings.

9.2.3 Configuring Fire Source Detection Shield

Purpose:

Loading ...

Hikvision DS-2TD2617B-6\/PA DS-2TD2617B-6/PA Temperature Screening Thermal Bullet Camera - 6.2mm