Loading ...
Loading ...
Loading ...
Configuring PoE (Only for Certain Devices) Configuring PoE Auto Recovery
User Guide 77
3
Configuring PoE Auto Recovery
Note:
PoE Auto Recovery is only available on certain devices. To check whether your device supports this
feature, refer to the actual web interface.
With PoE Auto Recovery enabled, the switch detects the link status between the ports
and connected PDs. The switch pings the IP addresses of PDs constantly. If a PD loses
connection, the switch will reboot it automatically.
Choose the menu PoE > PoE Auto Recovery to load the following page.
Follow these steps to enable PoE Auto Recovery and configure the parameters:
1) In the Global Config section, enable or disable PoE Auto Recovery. Click Apply.
PoE Auto Recovery Enable or disable PoE Auto Recovery globally.
Loading ...
Loading ...
Loading ...