Loading ...
Loading ...
Loading ...
Basic Operation en-us
19
Upper rack
Third rack
Silverware basket
Basic Operation
12 Basic Operation
Basic Operation
12.1 Protection against unintentional
operation
Your dishwasher has a built in feature to help prevent
unintentional operation, e.g. by children. After starting the
appliance, the door has to be closed within 4 seconds,
otherwise the operation will be paused. If this occurs,
follow the steps below to restart your dishwasher.
1. For top button controls: Press and close the door.
2. For front button controls: Close the door and press
.
a The wash cycle will resume.
Notes
¡
Unintentional operation is activated when:
– Pressing Start to begin a wash cycle
– Setting Delay time and pressing Start
– Opening the door while Delay time is active
– Opening the door during a wash cycle.
¡ This feature cannot be deactivated.
12.2 Switching on the appliance
▶ Touch
with a short 1 second touch.
The cycle last selected and the option last selected will
be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3 Setting a cycle
To adjust the wash cycle to the soiling level of the
dishware, select a suitable program.
▶ Press the cycle button repeatedly until the right cycle
has been selected.
a The cycle is set and the LED flashes.
12.4 Setting options
You can set options to complete the chosen wash
program.
Note:The available options depend on which program is
selected.
▶ Keep pressing the button for options until the
appropriate option is set.
a The additional function is set and the LED flashes.
12.5 Setting the time delay
You can delay the start of the wash cycle via the
HomeConnect® app.
▶ Open the HomeConnect® app and select the
appliance.
In the settings, you can use the time delay function to
delay the start of the wash cycle.
12.6 Starting the wash cycle
▶ Press
.
a While the wash cycle is running, a spot of light is
projected onto the floor below the appliance door. This
light will not be visible if the appliance is installed at eye
level with the cabinet front fitted flush.
a The wash cycle has ended when no displays on the
controls are lit.
a The wash cycle has ended when the spot of light is no
longer visible on the floor.
Notes
¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡ You can only change a cycle in progress if you can
cancel it first.
→
"Terminating the wash cycle", Page20
Loading ...
Loading ...
Loading ...