Loading ...
Loading ...
Loading ...
Network Camera User Manual
105
triggers an alarm.
Note
Only certain device models support the function.
10.8.1 Set Hard Hat Detection
Before You Start
Go to Configuration → System → System Settings → VCA Resources to enable Hard Hat
Detection.
Steps
1. Go to Configuration → Hard Hat Detection, and check Enable Hard Hat Detection.
2. Optional: Set Target Generation Speed.
Target Generation Speed
It refers to the target generation speed of the face entering the detection region. The greater
the value is, the quicker the generation speed is.
3. Set detection region.
1) Select detection region.
2) Click Draw Area, and click and draw the endpoints of the region in the live view image.
3) Right click to finish the drawing.
Click Stop Drawing
Finish drawing the region.
Click Clear All
Draw the region again.
Figure 10-5 Hard Hat Detection
4. For the arming schedule settings, refer to Set Arming Schedule. For the linkage method settings,
refer to Linkage Method Settings.
5. Click Save.
10.9 Face Picture Comparison and Modeling
For certain device models, you need to enable Multi-Target-Type Detection or Face Capture on
VCA Resource page first.
10.9.1 Face Picture Comparison
Face picture comparison serves the purpose of face recognition by comparing the captured face
Loading ...
Loading ...
Loading ...