Loading ...
Loading ...
Loading ...
Page 20
D. Measure the distance between
the Side Arm Hinge and the
closest part of the window
frame in line with the Side Arm.
Add 1/4” to this distance and cut
the Side Arm Foam to length.
Insert the Side Arm Foam
into the Side Arm Hinge and
repeat for the other side.
WARNING
Failing to install the Open Window
Brackets could cause injury or
property damage.
E. You must extend the Anti-Tip Brackets into
the Window Track Opening (the vertical track
that your window slides up and down in) until
they touch the window frame.
Secure the Anti-Tip Bracket in place with the
provided phillips screw. The air conditioner
may need to be adjusted front to back so
the Anti-Tip Brackets align with the Window
Track Opening.
C. You must install the Open Window
Brackets using the provided screws
shown here.
-or-
For installations where the bracket
sits on the window sill or a storm
window spacer – Use the provided 1”
Type A screw to secure the bracket
to the window sill.
NOTE: Drill 1/8” pilot holes before
screwing into the window sill.
WARNING
Do not leave the unit
unattended during installation.
Installation
Instructions
Use the 1/2”
Type B screw.
Use the 1/4”
Type B screw.
3. SEAL AND CLOSE THE WINDOW
Loading ...
Loading ...
Loading ...