Loading ...
Loading ...
Loading ...
3. Loosen the screw and pull out the clip plate to
dissemble the camera.
Figure 2-10 Dissemble the Camera
4. Use three M4 screws to fix the mounting base onto
the wall mount.
Figure 2-11 Fix the Mounting Base onto the Wall Mount
5. Refer to steps 5 to 8 of 2.1.1 Ceiling Mounting
without Junction Box to finish the installation.
Figure 2-12 Finish Installation
2.2 Installation of Type II Camera
2.2.1 Ceiling Mounting Without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-13 Drill Template
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Turn the trim ring counterclockwise to remove it
from the camera.
Loading ...
Loading ...
Loading ...