Loading ...
Loading ...
Loading ...
9
English
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a BLACK+DECKER factory service
center or a BLACK+DECKER authorized service center.
Always use identical replacementparts.
Repairs
The charger and battery pack are notserviceable. There are
no serviceable parts inside the charger or batterypack.
Accessories
WARNING: Since accessories, other than those
offered by BLACK+DECKER, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with thisproduct.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact BLACK+DECKER .
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1approved eye
protection when performingthisprocedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into aliquid.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start‑up can causeinjury.
MAINTENANCE
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING! BEFORE PERFORMING ANY
MAINTENANCE ON CORDED/CORDLESS POWER
TOOLS:
• Switch off and unplug the appliance/tool.
• Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
• Or run the battery down completely if it is integral and
then switch off.
• Regularly clean the ventilation slots in your appliance/
tool/charger using a soft brush or dry cloth.
Service Information
BLACK+DECKER oers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staed with trained
personnel to provide customers with ecient and reliable
product service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest to you.
Note
• BLACK+DECKER's policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
• Standard equipment and accessories may vary by
country.
• Product specifications may differ by country.
Protecting the environment
Z
Separate collection. Products and bat-
teries marked with this symbol must not
be disposed of with normal household
waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.
Technical data
LD120
Voltage V
DC
18V (20V Max)
No-load speed Min
-1
0-750
Chuck capacity mm
1-10
Weight
kg 0.9
Charger
SSC-250040**
Input voltage V
AC
100-240
Output voltage V
DC
8-20
Current mA 400
Approx. charge time Hours 3-5
Battery
BL1518
Voltage V
DC
18V (20V Max)
Capacity Ah 1.5Ah
Type Li-ion
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Loading ...