Loading ...
Loading ...
Loading ...
12 | MINI
™
-E SERIES TANKLESS ELECTRIC WATER HEATERS WWW.STIEBEL-ELTRON-USA.COM
COMMISSIONING
DANGER: Electrocution
The appliances are delivered with a power cable to be
connected to a permanent power supply.
Ensure that the proper wire gauge is installed with the
appliance in accordance with the minimum recommended
wire size in section 15.4, “Data table”, pg. 20.
!
Material losses:
When making the connection to a standard wall socket,
ensure that the socket is freely accessible to be easily
disconnected in case of an issue.
!
Material losses:
Take note of the product label. The specified voltage must
match the mains voltage.
f If the appliance is to be hardwired, connect the power cable as
shown in the wiring diagram (see 15.2, “Wiring diagram”, pg.
18).
11. Commissioning
11.1 Initial start-up
26_02_05_0087
f Before you activate the power supply, fill the appliance with
water first to avoid dry firing the heating element.
f Check for leaks.
f Activate the power supply.
f Run the tap.
f Check the function of the appliance.
11.2 Appliance handover
f Explain the appliance function to users and familiarize them
with its operation.
f Make users aware of potential dangers, especially the risk of
scalding.
f Hand over these instructions.
Loading ...
Loading ...
Loading ...