Loading ...
Loading ...
Loading ...
Go to Conī®guraīon ā System ā System Seī«ngs ā Power Consumpīon Mode , select the
desired power consumpīon mode.
Full Consumpīon Mode
The device works with all the funcīons enabled.
Low Consumpīon Real-Time Mode
The device DSP works normally. It records the videos with the main stream at the half frame
rate, and supports the remote login, preview and the conī®guraīon.
Low Power Sleep
When the device power is lower than Threshold of Low Power Sleep Mode, the device enters
sleep mode.
When the device power is recovered to 10% above the threshold, the device enters the user
conī®guraīon mode.
Scheduled Sleep
If the device is during Scheduled Sleep Time, it enters the sleep mode, otherwise it enters the
user conī®guraīon mode.
Note
For the scheduled sleep schedule seī«ngs, see Arming Schedule and Alarm Linkage .
The device supports the īming wake. For the details, see Set Timing Wake .
9.16 External Device
For the device supporīng external devices, including the supplement light, wiper on the housing
and the LED light, you can control them via the Web browser when it is used with the housing.
External devices vary with models.
Brightness
Adjust Low Beam Brightness and High Beam Brightness according to the actual scene.
Timing
The LED light will be turned on by the schedule you set. You should set Start Time and End
Time.
Auto
The LED light will be turned on according to the environment illuminaīon.
9.16.1 Supplement Light Seī«ngs
You can set supplement light and refer to the actual device for relevant parameters.
Smart Supplement Light
Network Camera User Manual
78
Loading ...
Loading ...
Loading ...