Loading ...
Loading ...
Loading ...
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes and the cable hole (optional)
according to the drill template.
Figure 2-13 Drill Template
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
5. Attach the mounting base to the ceiling and secure
it with supplied screws. For cement ceiling, you
need to install the expansion bolts at first.
Screws
Expansion Bolts
Figure 2-14 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
6. Route the cables through the cable hole, or the side
opening.
7. Install the camera back to the mounting base and
secure it.
Figure 2-15 Install the Camera Back
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
Tilt Position
[0° to 75°]
Rotation Position
[0° to 360°]
Figure 2-16 3-Axis Adjustment
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
Loading ...
Loading ...
Loading ...