Loading ...
Loading ...
Loading ...
Figure 5.4 Probe Setting Menu
If the instrument works with RP7000/PVA7000 series probes (e.g. PVA7250), the probe
menu is as shown in the figure below. The probe ratio cannot be modified and you
need to calibrate the probe. For specific probe models, please refer to
DHO4000 Data
Sheet
. For detailed technical information of the probes, please refer to the
corresponding Probe User Guide.
Figure 5.5 Active Probe Setting Menu
Probe Ratio
The oscilloscope allows you to set the probe attenuation manually. To obtain the
accurate measurement results, you must set the probe ratio properly. By default, the
probe ratio is 1X.
Vertical System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
DHO4000 User Guide
49
Loading ...
Loading ...
Loading ...