Loading ...
Loading ...
5. Firepower adjustment: in heating mode, push the regulator, the digital gear from 1
to 9 is normal heating gear, and the P gear is rapid heating. After 3 minutes, it will
return to the 9 gear. Turn to 0 to stop heating.
6. Shutdown: In heating mode, long press (long press for two seconds)
to exit heating and return to shutdown state.
7. Child lock: long press the child lock key for 2-3 seconds to drop a sound to lock or
unlock, locked successfully child lock digital display Lo, shutdown or standby with
heating state can operate child lock. After successfully locking, do not operate any
health except child lock.
Locked successfully as shown in figure:
8 timing: This function is to set the shutdown time. In heating mode, press
the timing button to enter the preset timing. The default time is 00 minutes.
Push adjustment time (progressive 1 minute, 99 minutes at most),
complete adjustment stop operation, digital flashing several times after entering the
steady on setting success. Continuously press the timing button to set the time of
multiple furnace areas. After the setting is completed, the small dot flashes at the lower
right corner of the display digital number in the furnace area. The time display in
different furnace areas automatically switches to about 5 seconds, with the small dot
as a mark.
As shown in the picture, timing left upper furnace area: 99 minutes
3
4
9. Panel high temperature warning: there is still residual temperature on the furnace
panel after use, warning display H, be careful of scalding hands.
10. Product dimensions and precautions:
10.1. Product dimensions 770*520*82 (30.3*20.47*3.34 inches) If not including the
foot of the fuselage thickness is 65MM/2.55 inches
10.2. Opening roar size 760*500*150mm (29.92*19.68*5.9 inches)
11. The corresponding temperature of each section of fire (set the numerical value
for the program), the measured data obtained by different working ring mirrors will
have deviation.
Range 1--2--3--4--5--6--7--8--9--P ten stages Corresponding degrees Celsius
60-80-100-120-140-160-210-240-270 degrees C ten segments
Corresponding to Fahrenheit 140-176-212-248-284-320-356-410-464-518F
ten segments
Note: if the product is used on the table, because the bottom will produce temperature during the use process,
please use high temperature resistant flame retardant material for the table such as marble....... And so on.
Loading ...
Loading ...
Loading ...