REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
DIAMOND GRIP EXTRA-THICK NITRILE
POWDER-FREE GLOVES
MODEL NO: SSP54L, SSP54XL, SSP56L,
SSP56XL, SSP57L, SSP57XL
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. INTRODUCTION
Diamond Grip gloves ideal for repair technicians, mechanics, health and safety work, among other uses. Greater elasticity and
durability thanks to extra-thick 10mil construction. Chemical resistant and certied to EN ISO 374-1:2016+A1:2018, EN 374-5:2016
and EN420:2003+A1:2009. Raised textured surface vastly improves grip over regular disposable gloves in both wet and dry conditions.
Powder-free for those with relevant dermatological conditions.
Notied Body: 2777
Tested By: SATRA Technology Europe Ltd, Bracetown Business Park, Clonee, Co. Meath, D15 F8PH, Ireland
Certicate Number: 2777/22358-02/E02-01
SSP54: Green SSP56: Orange SSP57: Black Sizes: 9-10 (L-XL)
2. SAFETY
9 Always perform a risk assessment before using this product. Other PPE such as safety glasses may be required for the task at hand.
9 This information does not reect the actual duration of protection in the workplace and the dierentiation between mixtures and
pure chemicals.
9 The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only (except in cases
where the glove is equal to or over 400 mm - where the cu is tested also), and relates only to the chemical tested. It can be dierent if
the chemical is used in a mixture.
9 It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may dier from
the type test depending on temperature, abrasion and degradation.
9 When used, protective gloves may provide less resistance to the dangerous chemical due to changes in physical properties.
Movements, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time signicantly. For
corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves.
9 Before usage, inspect the gloves for any defect or imperfections.
9 The gloves are oering protection against micro-organisms and comply to the test requirements.
9 The penetration resistance has been assessed under laboratory conditions and related only to the test specimen.
9 Ensure the gloves t the hands comfortably without slipping or splitting. The gloves should t snugly around the wrist.
9 After use, wearers should visually inspect the glove and remove any contamination from the outer surface before removing the glove
from the hand. Alternatively, carefully peel the glove o the hand so that contaminated glove outer does not touch the skin.
3. PERFORMANCE
EN ISO 374-1:2016+A1:2018 /
Type B
Level EN SIO 374-4:2019
Degradation %
EN ISO 374-5:2016 Level
40% Sodium Hydroxide (K) 5 10.0 Protection against Bacteria and Fungi Pass
30% Hydrogen Peroxide (P) 2 36.5 Protection against Viruses Pass
37% Formaldehyde (T) 5 17.5
4. MAINTENANCE
NOTE: THIS GLOVE IS FOR SINGLE USE ONLY - NOT REUSABLE.
4.1. STORAGE
9 Store in a cool, dry place, away from excessive heat (50
o
C).
9 Opened boxes should be shielded from exposure to direct sun or uorescent lighting.
9 Transport in original packaging.
4.2. OBSOLESCENCE
9 Life span is 3 years from date of manufacture.
SSP54L, SSP54XL, SSP56L, SSP56XL, SSP57L, SSP57XL Issue 2 (2,4) 27/11/23Original Language Version
© Jack Sealey Limited
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
SSP54L, SSP54XL, SSP56L, SSP56XL, SSP57L, SSP57XL Issue 2 (2,4) 27/11/23Original Language Version
© Jack Sealey Limited
