Loading ...
Loading ...
Loading ...
10
3. Install Accordion Panels on Air Conditioner
The Top rail and Sliding Panels on each side are offset to provide the proper pitch to the rear of the unit (5/16”).
This is necessary for proper condensate management and drainage. If you are not using the Side Panels for any
reason, this pitch to the rear must be maintained.
NOTE
A. Place unit on the fl oor, a bench or a table. Hold the Accordion Panel
in one hand and gently pull back the center to free the open end.
See Fig. 1.
Fig. 2
“
I
“ section
If storm window blocks AC, see Fig. 12.
NOTE
Fig. 4
Bottom Rail
Top RightTop Rail
Top Left
B. Slide the free end “
I
“ section of the panel directly into the cabinet as
shown in Fig. 2. Slide the panel down. Be sure to leave enough space
to slip the top and bottom of the frame into the rails on the cabinet.
C. Once the panel has been installed on the side of the cabinet, make
sure it sits securely inside the frame channel by making slight
adjustments.
Slide the top and bottom ends of the frame into the top and
bottom rails of the cabinet. Fig. 3.
D. Slide the panel all the way in and repeat on
the other side.
Fig. 1
Fig. 3
Top Rail
Bottom Rail
Top Rail
Bottom Rail
Loading ...
Loading ...
Loading ...