Loading ...
Loading ...
Loading ...
- 6 -
Notice: Do not open the cooling system when the water tank is empty. If the
Water tank is empty，the mark is shining, buzzer hints about 10 seconds, pump
switch cut off automatically.
Ⅴ. Faults and maintenance
Warm prompt: After a long-time operation, dust accumulation on the pre-filters and the wet
curtain would affect the airflow and air purification.
Please clean the machine regularly.
1.Clean pre-filter
Turn off the power, loose the screws, then pull out the pre-filter, clean it with soft brush and
mild detergent, rinse with water and dry under the sunshine.
2.Clean wet curtain
Turn off the power, loose the screws in the back-cover plate, take out the back-cover plate.
Loose the plastic nuts on the wet curtain, the side of wet pad can be removed. clean it
with soft brush and mild detergent, rinse by water and dry it under the sunshine, then install
it back to the machine.
If the dirt is hard to remove after long-term usage, please change to a new wet curtain.
3.Clean the surface
Turn off the power, clean it with mild detergent and a soft cloth.
Notice: Control panel shall not be touched by water.
Loading ...
Loading ...
Loading ...