Loading ...
Loading ...
Loading ...
INSTALLATION
10
How to place the end of drain hose:
•
• Position drain hose properly otherwise
water leakage.
Do not kink, protract or compress the drain hose.
, ,
• If drain hose is too long, do not force it into washing machine as this will
cause abnormal noises.
the improper position may
result in
Warning!
water trough
Less than 3m
Less than 15cm
1. Check if the are properly attached
the cabinet. If not, please rotate them to
their original position and tighten the nuts.
2. Check alignment of the product with a
leveler and do the succeeding steps if
necessary.
3. Loosen the lock nut and
feet to
4.
rotate the foot
either clockwise or counter clockwise ,
until it closely contacts with the floor.
Assure that the lock is secure and then
alternately press the four top corners of the
machine, to check if the proper adjustment
has been done.
• The lock nuts on all four feet must be screwed tightly against the housing.
Levelling the washing machine
Warning!
Lock nut
foot
Raise
Lower
lockloosen
correct
wrong
Drain direction
Left or right
Illustration
Left
Right
Loading ...
Loading ...
Loading ...