1406714 ES-A24140P-1 C
Read the manual carefully and ensure you have fully understood
its contents before operating this device for the first time.
Italiano
Español
English
Français
Nederlands
Português
Deutsch
Accessories List
The following accessories are included with TV:
User Manual × 1 Screw × 4 Base Stand × 2
AAA Battery × 2 Remote Control × 1 Warranty Card × 1
NOTE
The accessories may be dierent from the list above due to dierent models, countries
/
regions. Please refer to the actual accessory bag.
Contents
Installing the Stand or Wall Mount Bracket ............................................................................. 1
TV Front and Rear ..................................................................................................................2
Connection .............................................................................................................................3
Remote Control ......................................................................................................................5
Specifications .........................................................................................................................8
Other Information....................................................................................................................9
Figures and illustrations in this manual are provided for reference only and may dier
from actual product appearance.
Parts of the software function changes with the system upgrade.
This TV is equipped with a user manual and embedded E-Manual (Settings > Support >
E-Manual).
E-Manual support functions
Search
Try Now
QR Code
Find the help you are looking for.
Go directly to the function page and try it.
Scan to open the E-Manual on your mobile device.
Find what you want
English
A
Paragraphs beginning with the symbol indicate important instructions, tips or
conditions for the following settings.
For your own safety and the optimal performance of your TV, ensure to read
the safety instructions before performing any installation.
Compatibility with 3rd party products, software and services are not guaranteed. We cannot
be held liable for any damage or loss suffered whilst operating, using or connecting to
incompatible devices or apps.
The recording and playback of content on this or any other device may require permission
from the owner of the copyright or other such rights in that content. It is your responsibility
to ensure that your use of this or any other device complies with applicable copyright
legislation in your country. Please refer to that legislation for more information on the
relevant laws and regulations involved or contact the owner of the rights of the content you
wish to record or playback.
Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.
Important Notice
Safety Instructions
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
To ensure safe and correct use of this product, always comply with the following precautions
to avoid dangerous situations and damage to your unit:
Class II product : This symbol indicates that it does not require a safety connection of
protective earthing (ground).
AC voltage: This symbol indicates that the rated voltage marked with the symbol is
AC voltage.
Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type is in
compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017 of UK. Please
enter the model name at the following internet address to read the full text of the declaration of
conformity: https://global.hisense.com/support/certicate-download/.
Please refer to the rating label for TV model name and nd Bluetooth remote control model name
on the remote control or inside the remote control cover.
B
The intended use and ambient conditions for this TV
This TV is intended for the rendering of video and audio signals, on a table-top or wall-
mounted, in a home or oce environment. It must not be used in rooms with a high level
of humidity or dust concentration. The warranty is only valid if used as intended by the
manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device. To
reduce the risk of re or electrical shock:
- Do not expose this unit to rain, moisture, dripping or splashing water, and do not
place objects lled with liquids, such as vases, cups, etc. on or over the unit.
- Do not touch the TV with wet hands.
- Do not expose to direct air-conditioning and keep candles or other naked ames
away from the TV at all times.
If the TV is moved from a cold environment to a hot environment, leave it switched o
for at least an hour to avoid condensation. If used outside, make sure it is protected from
moisture.
If you notice anything unusual, immediately remove the power plug.
In case of re, use preferably a CO
2
gas or powder re extinguisher. If such extinguishers are not
accessible, try to isolate the electrical supply before using a water re extinguisher.
WARNING
Stability Hazard
A television set may fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of
the television set.
- ALWAYS use furniture that can safely support the television set.
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the television
set or its controls.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over,
pulled or grabbed.
- NEVER place a television set in an unstable location.
- NEVER place the television set on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and television set to a suitable support.
- NEVER place the television set on cloth or other materials that may be located between the
television set and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls, on
the top of the television or furniture on which the television is placed.
If your existing television set is being retained and relocated, the same considerations as above
should be applied.
C
Moving/Transportation
Before moving this TV, disconnect all cables
and move in the vertical position only. Grasp
the device on the upper and lower edges of
the frame.
- Do not press or put stress on the front
panel of the TV. It may take two or more
people to carry larger TVs.
If you have to briey lay down the TV, place
the unit with its entire front surface lying at
on soft material.
The LED screen is made of glass and can
break if is not handled properly. Always wear
rubber gloves to carry the unit. If the LED
screen is damaged, liquid crystal might leak
out. In case of skin contact, immediately
rinse thoroughly with water.
Power Supply
Incorrect voltages can damage the TV. Only
connect this unit to a power supply with the
correct voltage and frequency noted on the
type plate, using the supplied power cable.
The power plug must be easily accessible
so that the device can be disconnected at
all time. The unit is live, even if in standby
mode, as long as the unit is connected to a
power outlet.
It is recommended that this unit is placed on
a dedicated circuit.
- Do not overload the power outlets by
connect too many appliances to the
same outlet. Overloaded wall outlets,
extension cords, etc. are dangerous and
can result in electric shock and re.
After power o, don't turn it on again in 5
seconds. Frequent switching power supply in a
short period of time can cause abnormal TV.
Power plug and power cable
-
Do not touch the power plug with wet
hands.
- Do not place heavy objects on the power
cable. Route the cable so that it is not
kinked or laid over sharp edges, walked
on or exposed to chemicals. A power
cable with damaged insulation can
cause electric shock and re.
- Pull the power plug, NOT on the cable
when disconnecting. The cable can
become damaged and cause a short
circuit if pulled on.
- Do not place the power cable near a
high temperature object.
- Do not move the TV with the power
cable plugged into a socket.
- Do not use a damaged or loose power
cable, or a damaged socket outlet.
- Do not use any power cords other than
the one supplied with this unit.
- MAIN plug on the power cord is used as
the disconnect device, the disconnect
device and socket-outlet shall be easily
accessible.
Set-up
Check that the location is suitable to bear
the load of the TV. Place on a level, sturdy
and horizontal base. Ensure that the unit
does not hang over the edge of the base
when placed in or on furniture. If placed on a
cart, use caution when moving to avoid the
unit from tipping over.
- Place the unit in a normal upright
horizontal position. It must never be
operated vertically, lying at or hanging
overhead from the ceiling.
- Place the unit where it is not exposed to
direct sunlight or other sources of heat.
When mounting the TV on a wall, follow the
instructions supplied with the wall-mount,
make sure not to install the TV by hanging
the power and signal cables on the back of
the TV.
Air ventilation and high
temperatures
Install your TV only where there is proper
ventilation, and ensure that there is at least
10 cm free space on the sides and 20 cm
above the unit for air circulation. Excessive
heat and obstruction of ventilation could
lead to re or early failure of some electric
components.
- Do not block any ventilation openings
with newspapers, tablecloths, curtains,
etc.
- Do not dry clothing etc. on top of the unit.
D
- Take care not to touch the ventilation
openings since they may become hot.
- Do not insert foreign objects into the TV
through the vents.
20cm
10cm
10cm
10cm
The Stand
- Do not use any stand other than the one
supplied with this unit.
- Do not modify or use the stand if it
becomes warped of physically damaged.
- During setup, make sure that all the
screws are securely tightened.
- Ensure that the TV does not suer any
impact during the attachment of the stand.
- Ensure that children do not climb onto
the stand.
- Attach or remove the stand with at least
two people.
Prevent small items from getting into the
interior of the device through the ventilation
slots. Such objects may cause short circuits,
which may cause re.
If something should get inside the unit,
immediately unplug the power plug of the
device and contact service support.
The LED screen
Despite thorough care when manufacturing
this display, it cannot be 100% guaranteed
that no sub-pixel defects will occur due
to technical reasons. These cannot be
considered as a device defect in terms
of the guarantee. They will not aect the
performance and reliability of the TV.
To prevent “image burn”, avoid displaying
still images for long periods of time, there
is a possibility that a copy of the image
may remain. If the aspect ratio is set to 4:3
for a long period of time, image burn may
occur on the black areas. Image burn is not
covered by the warranty.
- Do not apply strong force or impact on
the display panel.
Avoid touching the LED screen or touching
it for long periods of time. Doing so may
produce some temporary distortion eects
on the screen.
Radio waves
- Do not use the TV in any medical
institutions or locations with medical
equipment. Radio waves may interfere
with medical equipment and cause
malfunction.
- Do not use the TV near any automatic
control equipment such as automatic
doors or re alarms. Radio waves
may interfere with automatic control
equipment and cause malfunction.
If you have a cardiac pacemaker, keep a
distance of at least 22 cm from the TV. Radio
waves may interfere with the operation of a
pacemaker.
Built-in wireless LAN
- Do not connect to wireless networks
that you do not have the usage rights
for. Data transmitted and received over
radio waves may be intercepted and
monitored.
The built-in wireless LAN uses 2.4 GHz
frequency band. To avoid malfunctions or slow
response caused by radio wave interference,
keep the TV away from devices such as other
wireless LAN devices, microwaves, mobile
phones, and other devices that use 2.4 GHz
signal.
Warning about o-gassing
New furniture, carpet, paint, building
materials and electronics can release
chemicals into the air through evaporation.
After you set your TV up and turn it on for
the rst time, you may notice a slight smell
within a couple of hours. This is because
some components of TV are heating up for
the rst time. The materials that we use fully
meet the environmental requirements and
regulations. Your TV is working just ne and
E
the fumes from the o-gassing will diminish
eventually.
Supervision
- Do not let children play unsupervised
close to the TV. It could tip over, be
pushed o or pulled down from the stand
surface and injure someone.
- Do not allow a switched-on TV to run
unattended.
Volume
Loud music and noises can lead to
irreversible damage to your ears. Avoid
extreme volume, especially over long
periods and when using headphones.
If you hear a drumming noise in your ears,
turn down the volume or temporarily stop
using headphones.
Thunder Storms
Pull out the power plug and all connected
antenna cables from the TV during a
thunderstorm. Overvoltage caused by
lightning strikes can damage the TV via the
antenna system, as well as the wall socket.
Long periods of absence
As long as the power plug is connected to a
live socket outlet, the TV will consume power
even in standby mode. The power plug
and all connected antenna cables should
be disconnected out during long periods of
absence.
Cleaning and care
CAUTION:
Unplug the power cord prior to cleaning
the TV.
Clean the TV, the screen, and the remote
control with a soft, moist, clean and colour-
natural cloth only. Do not use any chemicals.
- Do not subject the surfaces to insect
repellent, solvent, thinner or other
volatile substances. This may degrade
the surface quality.
- Do not spray water or other liquids
directly on the TV. Liquid inside the TV
could lead to product failure.
- The surface of the display panel is
treated and may be easily damaged.
Take care not to scratch it with ngernails
or other hard objects.
- Also wipe the power plug with a dry cloth
at regular intervals.
Service/Repair
Never remove the cover/back of the TV; there
are no user serviceable parts inside. Refer all
service to qualied service personnel.
Packaging
Keep the anti-moisture materials and plastic
bags out of reach of children.
Plastic bags can cause suocation and the
anti-moisture material is harmful if swallowed.
If swallowed by mistake, force the patient to
vomit and visit the nearest hospital.
Modication
Do not attempt to modify this product in any
way. Unauthorised modication could void
the warranty of this unit, cause electric shock
and res.
Remote Control batteries
- Incorrect installation may cause battery
leakage, corrosion and explosion.
- Replace only with the same or equivalent
type.
- Do not mix old and new batteries.
- Do not mix dierent battery types.
- Do not use rechargeable batteries.
- Do not burn or break up batteries.
- Be sure to dispose of batteries correctly.
- Do not expose batteries to excessive
heat such as sunshine, re or the like.
Outdoor Antenna Grounding
If an outdoor antenna used, be sure the
antenna system is protected against voltage
surges and built-up static charges.
Disposal
Refer to the recycling section of this manual.
1
Installing the Stand or Wall Mount Bracket
Installing the stand
1. Carefully place your TV face-up on a soft,
flat surface to prevent damage to the TV or
scratching to the screen.
2. Take out the 2 stands from the accessory bag
and then insert the stands into the bottom
slots of the TV.
3. Secure the stands to the TV with the 4
screws in accessory tightly.
Follow the illustrations and textual instructions
below to complete the installation steps:
8.0 -10.0 mm
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover
of the TV
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is
not correctly mounted, the TV may fall and cause property damage or personal injury.
NOTE
The diameter and length of the screws differ depending on the wall mount bracket model.
Wall mount bracket is optional. Your TV may not have wall mount bracket. Please refer to
the actual accessories.
Place spacers between the TV and bracket.
Standard dimensions are shown below.
We do not recommend hanging the TV on a slanted wall, and when
wall mounting make sure your television remains parallel to the wall
and does not lean forward.
TV
screen
Vertical
surface
Installing the wall mount bracket
Before mounting the TV, remove the TV stand if you have already attached it, and make sure the
wall mount bracket supports the weight of your TV.
CAUTION
Be sure to disconnect the AC power cord before installing a stand or wall mount
brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or damaged
by hard objects or from pressure.
After the installation is completed, make sure the TV is steady on a table or firmly attached
to a wall mount, before removing all protective film, if any.
Base Stand Screws:
(ST4×14F) × 4(32")
(ST4×20F) × 4(40")
Wall mount hole
pattern (mm)
100 × 200(32")
200 × 200(40")
Wall mount screw size M6
2
TV Front and Rear
Power button(Standby/Source)
Power indicator
Power cord
Item Description
Power indicator The light is red in standby mode.
Power button
(Standby/Source)
Press the button to turn the TV on. Press it again
to bring up the control menu and move the focus
between different inputs. Long press the button to
make a selection.
ANT 1
DVB-T/T2/C
ANT 2
DVB-S/S2
13/18V 420mA
LAN
HDMI 2(eARC) HDMI 1
COMMON INTERFACE (CARD FACE FRONT)
AV IN
HEADPHONE
DIGITAL
AUDIO OUT
DC 5V 0.5A(MAX) x 2
USB x 2
NOTE
ANT2 Jack supports power supply for satellite antenna (13/18V, 420mA
max.)
Check the jacks for position and type before making any connections.
Loose connections can result in image or colour problems. Make sure
that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to
the user’s manual of your A/V device for compatibility and connections
procedure.
Before connecting external equipment, remove the mains plug from the
wall socket. Otherwise, it may cause electric shock.
Powering on the TV requires several seconds to load programmes. Do not
rapidly turn the TV off as it may cause the TV work abnormally.
The Picture is Only for Reference.
32"
32"
40"
40"
ANT 1
DVB-T/T2/C
ANT 2
DVB-S/S2
13/18V 420mA
LAN
HDMI 2 HDMI 1(eARC)
COMMON INTERFACE (CARD FACE FRONT)
AV IN
HEADPHONE
DIGITAL
AUDIO OUT
DC 5V 0.5A(MAX) x 2
USB x 2
3
Connection
Terminals
or
ANT OUT
ANT
DVB-T/T2/C
ANT
DVB-S/S2
HDMI
DVD/Blu-Ray/AV receiver/
Set-top Box
HDMI
Audio Amplier/Speaker
HDMI (eARC)
HDMI
Audio Amplier/Speaker
DIGITAL
AUDIO OUT
HEADPHONE
DC 5V 0.5A(MAX)
USB
CAM CARD
NOTE
Excessive sound pressure from
earphones and headphones can cause
hearing loss.
NOTE
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface and
cause a malfunction.
You must obtain a CI+ module and card from the
service provider of the channels you want to watch.
CI+ is not supported in some countries and regions.
NOTE
Exceeding a total current consumption may result in damage. The USB 1.1 and USB
2.0 devices maximum current consumption are 500mA. The USB 3.0 device maximum
current consumption is 1A (only for some models).
For individual non-standard high-capacity mobile hard disk, if its impulse current is
greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV does not
support it.
AV IN
White(L)
Red(R)
Yellow(Video)
(not included)
(not included)
(not included)
VCR/DVD Player/
Recorder/Set-top box/
Satellite Receiver/
Video Camera
Video
L
A/V OUT
R
4
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
NOTES
You must use the built-in Wireless LAN Adapter to use a wireless network because the set
doesn’t support external USB network adapters.
If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.
If you apply a security system other than the systems listed below, it will not work with the TV.
Security system: WPA, WEP, WPA2.
In order to guarantee smooth network, the distance between router and TV should be less
than 10 metres.
Wireless setup
To connect your TV to your network wirelessly, you need a wireless router or modem.
See the illustration below.
·
The built-in Wireless LAN Adapter supports the IEEE 802.11b/g/n communication
protocols. It is recommended to use IEEE 802.11n router. Low transfer rates for b/g
may have the influence on the quality of streamed videos and other media.
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your TV to an
external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.
·
It is recommended to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t
have to enter them manually. Most home networks already have DHCP.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
5
Remote Control
NOTE:
The included remote control will vary depending on model, country/region.
Check information according to the actual remote control in the accessory bag.
APP
APP or
special
application
6
Buttons of remote control
BUTTON DESCRIPTION
Power on/ Standby
INPUT /
Select input sources
Number button Select a channel or input numbers
GUIDE
Display the Electronic Program Guide (DTV mode)
CH.LIST Display the Channel List on the screen
Red/Green/
Yellow/Blue buttons
Special function buttons
/ Press to enter Menu
Playpad keys
˄
/
˅
/
˂
/
˃ D-pad (up/down/left/right navigation buttons)
OK Conrmation button
Under the Menu or App, return to the previous place
EXIT Exit the menu or exit the application
Display the Home screen
VOL Volume (up/down)
CH Channel (up/down)
/ Mute and restore sound
TXT/TEXT Turn on/off the teletext function
INFO Display the current program information
AUDIO ONLY
When you select this option, the screen will not display the
picture
SUBTITLE Activate or deactivate the subtitle mode
MEDIA Enter the MEDIA
APPS
/
Fast access to app store
APP Quick access buttons to APP
BROWSER Enter into BROWSER
/ Custom button to launch input or apps quickly
NOTE: Buttons listed here are for reference only. Actual remote control may vary
depending on model, country/region.
7
Remote Control Operation Range
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re-cycler.
1. The remote control can work at a distance of up
to 8 metres in
front of the TV set.
2. The remote control angle: taking the remote
sensor as an apex, 6 metres away, its controlled
horizontal angle is within ±30°, while the vertical
angle is within ±15°.
3. The operating distance may vary depending on
the brightness of the room.
Installing Batteries in the Remote Control
1. Slide the back cover to open the battery compartment of the remote
control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( -
) ends of the batteries with the (+) and ( - ) ends indicated in the
battery compartment.
3. Close the battery compartment with the cover.
NOTE
Product image is only for reference, actual product may vary in appearance.
Dispose of your batteries in a designated disposal area.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into the
battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash immediately.
Risk of fire or explosion if the battery is replaced by an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
6m
8m
6m
6m
8m
6m
30° 30°
15°
15°
8
Features, appearance and specifications are subject to change without notice.
Specications
Item
32" 40"
Dimension
(W × H × D)
Without Stand
28.6 × 16.9 × 3.3 inches
(726× 430 × 85 mm)
35.4 × 20.3 × 3.3 inches
(900 × 515 × 85 mm)
With Stand
28.6 × 18.9 × 7.3 inches
(726 × 479 × 186 mm)
35.4 × 22.2 × 7.3 inches
(900 × 565 × 186 mm)
Weight
Without Stand 8.2 lbs (3.7 kg) 11.9 lbs (5.4 kg)
With Stand 8.4 lbs (3.8 kg) 12.1 lbs (5.5 kg)
Active Screen Size (Diagonal) 80 cm 100 cm
Screen resolution 1366 × 768 1920 × 1080
Audio power 6W + 6W 7W + 7W
Operating mode power density 0.024 Watts/cm² 0.018 Watts/cm²
Network standby power consumption
≤ 2.0 W
Power consumption in standby mode
0.5 W
Power consumption Please refer to the rating label.
Power supply Please refer to the rating label.
Receiving
systems
Analogue PAL-D/K, B/G, I, SECAM-D/K, B/G
Digital DVB-T/T2, DVB-C, DVB-S/S2
Wireless
LAN Module
specifications
Frequency
Range
2.4-2.4835GHz
Output Power
(Max.)
2.4-2.4835GHz 17dBm
Environmental conditions
Temperature: 41°F - 95°F (5°C - 35°C)
Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa
HDMI Input
RGB / 60Hz (640×480, 800×600, 1024×768)
YUV / 60Hz (480i, 480p, 720p, 1080i, 1080p)
YUV / 50Hz (576i, 576p, 720p, 1080i, 1080p)
9
Recycling/Licenses
WEEE (Waste Electronic Electric Equipment)
European Directive 2012/19/EU
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that
it is recycled in a manner that protects human health and the environment.
For more information about where you can drop o your waste equipment for
recycling, please contact your local city oce, your household waste disposal
service or the shop where you purchased the product.
Batteries
In accordance with the Battery Directive, used batteries should not
be disposed of in the domestic waste. Dispose your batteries in the
collection containers specic for this purpose in retail stores.
ROHS (Restriction of Hazardous Substance)
European Directive 2011/65/EU
This European directive limits the use of dangerous and hazardous
substances which are dicult to recycle.
This allows recycling easily the EEE and contributes to the safeguard of
the environment.
Substances included in this product match to the RoHS directive.
The terms HDMI and HDMI High-Denition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio, and the double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, DTS:X, Virtual:X, and the DTS:X logo are
registered trademarks or trademarks of DTS, Inc. in the United States and
other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
Other Information
EPREL Registration Information
40A4K (1339018)
40A47K (1339036)
40A48K (1339037)
40A49K (1339039)
40E4KT (1418576)
40E41KT (1418579)
40E42KT (1418580)
40E43KT (1418581)
40A4N (1805431)
40A47N (1847587)
40A48N (1847701)
40A49N (1805445)
40E4NT (1805449)
40E41NT (1805457)
40E42NT (1847702)
40E43NT (1805454)
32A4K (1339265)
32A47K (1339294)
32A48K (1339300)
32A49K (1339308)
32E4KT (1418563)
32E41KT (1418565)
32E42KT (1418566)
32E43KT (1418570)
32A4N (1830468)
32A47N (1847710)
32A48N (1847713)
32A49N (1830469)
32E4NT (1830472)
32E41NT (1830475)
32E42NT (1847727)
32E43NT (1830473)
EPREL-Registrierungsdaten Informação de Registo EPREL
Información del registro EPREL Informations sur l'enregistrement EPREL
Informazioni di registrazione EPREL EPREL-registratiegegevens
