Loading ...
Loading ...
Loading ...
9
FIGURE 3
1. The saw is shipped with the arm secured in the down
position as shown in Figure 3. To release the arm,
push it down, cut the plastic tie and release the lock
pin (A).
2. Lock pin (A) is for storage and transport only. Saw is
not to be locked in down position during cuts.
3. Inspect the tool carefully to make sure no damage
occurred during shipping.
4. Do not discard the packaging material until you have
carefully inspected and satisfactorily operated the
tool.
FIGURE 5
To ensure safe and accurate operation,
this saw should be mounted to a stable
and level surface such as a workbench. To mount the tool
to a stable surface, refer to Figure 5 and do the following:
1. Locate the four mounting holes in the base of the
saw (C).
2. Secure the tool to the mounting surface using 3/8”
diameter machine bolts, lock washers, and hex nuts
(not included). Make sure the bolts are long enough
to accommodate the saw base, lock washers, hex
nuts, and the thickness of the workbench.
3. Tighten all four bolts securely.
4. Check to make sure that the saw is secure before
operation.
MOUNTING THE SAW TO A
STABLE SURFACE
A
C C
C C
Saw Head lock pin is for storage and
transport only. This saw should never be locked in the down
position while making cuts.
Before moving/transporting your saw it is important to make sure all of the following steps have been
followed to ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
• Always turn the power off and unplug saw before transporting.
• Secure power cord to avoid any snags or hang ups during transportation.
• Always lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
• Do not use power On/Off switch handle or power cord to lift your saw.
• Always place the saw onto a stable and level surface with clearance for handling and maneuvering.
MOUNTING AND TRANSPORTATION
PREPARATIONS FOR TRANSPORTATION
SAW ARM LOCK PIN
BASE WITH CARRY HANDLES
Use the carry handles which are designed into the base for
safe and easy transportation of the saw. Shown in Fig. 4.
FIGURE 4
B
Loading ...
Loading ...
Loading ...