Loading ...
Loading ...
Loading ...
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Hour, minute, second
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Countdown starts)
Start
●
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
●
When using the auto-repeat timer with
a countdown of 10 seconds or less, the
countdown end beeper will sound for
only one second.
●
To reset a paused countdown to the
start time, press (A).
3. Press any button to stop the tone.
Note
●
If flash alert is enabled, display
illumination flashes along with the
beeper at the end of the countdown.
Pressing any button to stop the alarm
beeper also stops the flash alert
operation.
l
Configuring Flash Alert Settings
Other Settings
This section explains other watch settings you
can configure.
Configuring Flash Alert
Settings
If flash alert is enabled, display illumination will
automatically flash along with the alarm, timer,
and other beepers.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (D) for at least two seconds to
toggle flash alert between enabled and
disabled.
●
Flash alert toggles between on and off
each time you hold down (D).
●
is displayed while flash alert is
enabled.
Other Information
This section provides non-operational
information you also need to know. Refer to
this information as required.
Specifications
Accuracy at normal temperature :
±15 seconds a month
Timekeeping :
Hour, minute, second, year, month, day,
day of the week
a.m./p.m. (P)/24-hour (24) timekeeping
Full Auto Calendar (2000 to 2099) *
* Year display on setting screen only.
Alarm :
Time alarm
Setting units: month, day, hour, minute
Alarm beeper duration: 20 seconds
Hourly time signal: Beep every hour on the
hour
Timer :
Measuring unit: 1 second
Countdown range: 24 hours
Time setting unit: 1 second
Auto Repeat
10-second beeper when the end of the
countdown is reached
Stopwatch :
Measurement units
1/100 seconds (first hour); 1 second
(after first hour)
Measuring range
23 hours, 59 minutes, 59 seconds (24
hours)
Measurement Functions:
Elapsed time, cumulative time, split
times, 1st and 2nd place finisher times
Other :
Auto return, 12-/24-hour timekeeping, LED
backlight (Super Illuminator, afterglow),
flash alert
Power Supply :
CR2016 x 1
Battery life: Approximately 5 years
Conditions:
Alarm: Once (20 seconds)/day (flash
alert enabled)
Illumination: Once (3.5 seconds)/day
Specifications are subject to change without
notice.
Watch Operation Guide 3529
11
Loading ...