Elica FRHUC522730 User Guide

Loading ...

MOUNTING THE RANGE HOOD

Note 1 : On stainless steel hoods, carefully remove the plastic protective film from all exterior

surfaces of the hood and chimney prior to final installation.

Note 2: At least two people will be required to mount the hood.

Hood Preparation

1. Remove the filters

2. Remove either the top or back wiring knock-out and install and approved electrical cable clamp

3. Remove the rear or top duct knock-out

4. Install the duct connector/damper

5. Connect the wiring

6. Install the under cabinet range hood on kitchen cabinet

7. Turn power back on

8. Test the function of the unit, speed and lights

9. Re-install the filters

INSTALLATION

Note:Measure the distance between stove top and the bottom of range hood,25’’ to 30’’

is recommended.

1 Mark the screws holes in the bottom of kitchen cabinet as per position of screws holes at the

top of hood

Install the screws in the bottom of kitchen cabinet

Hook hood onto to screws in the kitchen cabinet

Balance the hood body by slightly adjusting the hood mounting

screws Tighten all screws until secure

Loading ...

Elica FRHUC522730 Taranto Series 30 Inch Under Cabinet Convertible Hood with 400 CFM, LED Lights, LED Lighting, cETLus Certification in Stainless Steel