R.W.FLAME W51115 Antarctic Star 24 Inch 2 Door Mini Fridge Beverage Digital Temperature Control

User Manual - Page 6

For W51115.

PDF File Manual, 13 pages, Read Online | Download pdf file

W51115 photo
Loading ...
Loading ...
Loading ...
6
Setting The Temperature Controls
When press the temperature setting button “+” or “-“, the system will enter the set up mode
of the upper or lower compartment automatically. The LED display will flash and show the
setting temperature. After 5 seconds the flash will stop and it will show the actual
measured interior temperature.
Press the button once, the temperature will decrease or increase 1 . After stopping
pressing the button for 5 seconds, LED figure will stop flash, then revert back to display the
setting temperature of the upper or lower compartment.
After the unit is unplugged, the system will return to default setting temperature, which set
by factory. The default setting temperature as below:
Upper compartment: 6
Lower compartment: 12
Upper compartment: The temperature setting can be adjusted from 5 to 12.
Lower compartment: The temperature setting can be adjusted from 12 to 20.
Attention
If the unit is unplugged, power lost, or turned off, you must wait 3 to5 minutes before
restart the unit. If you need attempt to restart before this time delay, the Wine
Cooler/Beverage Cooler will not start. If first time use or longer absence of using, the
temperature will difference between setting and LED display temperature. After running a
period, the temperature will be reverting back.
Shelves
To prevent damaging the door gasket, make sure to have the door all the way opened
when pulling shelves out of the rail compartment.
For easy access to the storage content, you must pull the shelves approximately 1/3 out of
the rail compartment, however this unit was designed with a notch on each sides of the
shelf tracks to prevent bottles from falling.
Please refer to the following direction for replace shelf with different method.
Type A
If need to take out any shelf, move the shelf towards the gap on the both sides and
alignment with shelf support A. Then lift upwards the shelf and pull out it from the cabinet
once the shelf support disengaged from the gap.
A
A
Loading ...
Loading ...
Loading ...