Loading ...
Loading ...
Loading ...
Clamp Meter
Safety Information
3
• Connect the common test lead before the live test lead and
remove the live test lead before the common test lead.
• Remove all probes, test leads, and accessories before the
battery
doo
r is opened.
• Do not use and disable the Product if it is damaged.
• Do not use the Product if it operates incorrectl
y.
• Do not use test leads if they are da
maged. Examine the test
leads for damaged insulation, exposed metal. Check test
lead continuity
.
•
Before each use, examine the Product. Look for cracks or
missing pieces of the clamp housing. Also look for loose or
w
eakened components. Carefully
examine the insulation
around the ja
ws. See Figure 1, item
.
• Examine the case before
you use
the Product. Look for
cracks or missing plastic. Carefull
y
look at the insulation
around the terminals.
• Read all safety
information before you use the
Product.
• Remove batteries to prevent battery
leakage
and damage to
the Product if it is not used for an extended period.
• Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures above
50 °C. If the
batteries are not removed, battery
leakage can
damage the Product.
Caution
To prevent possible damage to the Product or to equipment
under test, use a thermocouple rated for the temperatures to be
measured. The Product is rated for -10.0 °C to +400.0 °C and
14 °F to 752 °F. The included type-K thermocouple is rated to
260 °C.
1
2
300 V
CAT
600 V
CAT
hfk002.eps
Figure 1. Clamp Jaw (325 is Shown)
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...