Loading ...
Loading ...
Loading ...
3.2.1 Set Camera Info
Customize specic informaon for the device. It may help idenfy a certain device when mulple
devices are under management.
Go to VCA → Set Applicaon → General Sengs → Camera Info. to set Camera No. and Camera
Info.
3.2.2 Metadata
Metadata is the raw data that the device collects before algorithm processing. It is oen used for
the third party integraon.
Go to VCA → Set Applicaon → General Sengs → metadata Sengs to enable metadata
uploading of the desired funcon.
Road Trac
The metadata of the road trac includes the target vehicle/plate license ID, target coordinate,
me, license plate number, moving direcon, etc.
3.3 Road Trac
The device captures the passing vehicles and uploads the vehicle informaon together with the
captured picture.
Note
●
For certain device models, you need to select Road Trac on VCA Resource page rst.
●
This funcon is only supported by certain device models.
3.3.1 Set Vehicle Detecon Rule
In Vehicle Detecon, the device detects and captures the passing vehicles and the license plates.
The vehicle color, type, and other related informaon can be recognized automacally.
Before You Start
Go to VCA → Select Applicaon to select Road Trac, and click Next to enable the funcon.
Steps
1.
Go to VCA → Set Applicaon → Road Trac → Rule .
2.
Check Enable.
3.
Select a Detecon Scene. Change the Scene Name if required.
The device supports mulple detecon scenes with independent detecon parameters.
4.
Draw lane areas in the scene.
1) Click
to avoid accidental PTZ changing during conguraon.
Network Speed Dome User Manual
9
Loading ...
Loading ...
Loading ...