Loading ...
Loading ...
Loading ...
21
STOPPING INSTRUCTIONS
1. Release the throttle control and allow the engine to idle.
2. Press and hold the On/O switch in the O (O) position until the engine comes to a complete stop
(Fig. 6).
Fig. 9
Electric Start Port
6. Run the electric start accessory for 2 seconds. DO NOT run the electric start accessory for more
than 2 seconds.
START:
7. Move the choke lever to Position 2 (Fig. 7).
8. Run the electric start accessory in intervals no longer than 2 seconds each until the unit starts.
9. Remove the electric start accessory from the unit, unless specied otherwise in the electric start
accessory Operator's Manual.
10. Allow the engine to warm up for 60 seconds.
11. Move the choke lever to Position 3 (Fig. 7). Allow the engine to warm up for an additional 60
seconds. The unit may be used during this time.
NOTE: The engine is properly warmed up when it accelerates without hesitation.
IF... the engine hesitates, return the choke lever to Position 2 and continue the warm-up.
IF... the engine does not start, repeat the starting procedure.
IF... the engine fails to start after a few attempts: Move the choke lever to Position 3. Insert the electric
start accessory into the electric start port. Press and hold the throttle lockout. Squeeze and hold
the throttle control. Run the electric start accessory in intervals no longer than 2 seconds each until
the unit starts. Remove the electric start accessory from the unit, unless specied otherwise in the
electric start accessory Operator's Manual.
IF... the engine is already warm: Move the choke lever to Position 3. Insert the electric start accessory
into the electric start port. Press and hold the throttle lockout. Squeeze and hold the throttle
control. Run the electric start accessory in intervals no longer than 2 seconds each until the unit
starts. Remove the electric start accessory from the unit, unless specied otherwise in the electric
start accessory Operator's Manual.
Loading ...
Loading ...
Loading ...