Loading ...
Loading ...
Loading ...
- 11 -
LED LIGHT REPLACEMENT
TOOLS NEEDED: Phillips screwdriver and flashlight to
illuminate the work area.
If the LED light is not illuminating, the light most likely
needs to be replaced.
Replacement LED lights may be purchased from
Tramontina by calling Tramontina’s Customer Service
Department (800-221-7809).
NOTE: The replacement light is NOT available from home
improvement, hardware or discount stores.
LED Light
LED Light Diagram
Clear Plastic
Cover
Removing the Existing LED Light
Unplug the wine and beverage
center.
1) Using a Phillips screwdriver,
remove the two screws from the
clear plastic cover.
2) Tilt the panel towards the front
of the wine and beverage center
and unscrew the LED board
from the black plastic spacer.
3) Gently unclip the power cable
from the red socket insert on
the LED board.
Installing the Replacement
LED Light
• Insert the power cable into
the red socket insert on the
replacement LED board.
• Position within the black plastic
spacer.
• Reassemble the LED board,
spacer and cover together using
the two screws.
• Tuck the cable into the wire slot.
• Reposition the panel and
carefully enclose the cord within
the LED housing.
• Reattach the clear plastic panel
using two screws.
Power Cable
LED Board
Black Plastic
Spacer
Wire Slot
2
3
1
Loading ...
Loading ...
Loading ...