plunger can
model no: pc1, pc19, pc38
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SaFeTY
1.1. general SaFeTY
WarnIng! ensure Health & Safety regulations relating to the use of flammable liquids are adhered to when using this equipment.
Familiarise yourself with the Plunger Can’s application and potential hazards.
8 DO nOT smoke whilst handling the Plunger Can and fluids.
8 DO nOT operate the Plunger Can in areas where there may be flying sparks or other sources of ignition.
8 DO nOT use the Plunger Can to soak rags without the plunger attached.
9 maintain Plunger Can in good condition.
9 Wear suitable protective clothing (PPe) including gloves and eye protection.
9 ensure the work area is free of clutter and has adequate lighting.
9 Keep children and unauthorised persons away from the work area.
9 dispose of used cloths in a safe manner and away from sources of ignition.
9 When not in use store in a safe manner and away from sources of ignition.
2. InTrODucTIOn
easy one-handed operation, convenient and safe for dispensing flammable solvents. Spring-mounted plunger delivers measured
amounts of liquid to swab/cloth. Perforated metal flash arrestor protects against ignition and escape of flammable vapours.
Surplus liquid drains safely back into resevoir.
3. i OperaTIOn
3.1. Filling the can.
3.1.1. Tollthecan,removetheplungermechanismbytwistingthrough90°anti-clockwise(Fig.1).
3.1.2. Fill the can no more than three quarters full.
3.1.3. Replace the plunger by inserting back into the can, aligning up the two rollers on the
underside of the plunger mechanism with the two cutaways on the can and turning
90°clockwiseuntilitlocksinplace.
3.2. Tosoakacleaningclothwithuid.
3.2.1. Wearingsuitablehandprotection,placeclothovertheperforatedasharrestoron
the plunger.
3.2.2. Pushtheplungerdownandrelease,repeatthisprocedureuntilyouhavesuciently
wet the cloth.
3.2.3. Anyexcessuidwilldrainbackintothereservoir.
WarnIng: DO nOT operate the plungerwithoutaclothcoveringtheperforatedash
arrestorascleaninguidmaybeejected,causingpersonalinjury.
PC1,PC19,PC38Issue2(H,F)4/07/2018
Original Language Version
© Jack Sealey limited
Refer to
instruction
manual
Wear protective
gloves
Wear eye
protection
Wear face
mask
Wear protective
clothing
Flammable
Sealey group, Kempson Way, Suffolk Business park, Bury St edmunds, Suffolk. Ip32 7ar
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutprior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
envIrOnMenT prOTecTIOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
undo
Tighten
fig.
1
