Loading ...
Loading ...
Loading ...
10
LAWN MOWER PREPARATION
The following section describes steps necessary to prepare the lawn mower for use. If after reading
this section, you are unsure about how to perform any of the steps please call (872) 314-0005 Mon-Fri
9-5 EST for customer service. Failure to perform these steps properly can damage the lawn mower or
shorten its lifespan.
UNPACKING
Tools required (not included): #2PH screwdriver, utility knife.
Unpack the lawn mower and all its parts, and compare against the list below. Do not discard the carton
or any packaging until the engine is completely assembled.
PACKING LIST
Side discharge chute*1
Grass Catcher*1
Cable clip*2
Spark plug wrench*1
User manual*1
Funnel*1
10W-30 oil*1
ASSEMBLE LOWER & UPPER TUBE
1. Take out the folded mower from the outer box.
2. Lock the foldable handle between the upper tube and lower tube. Turn the lower handle to an angle
that matches the base and tighten the knobs.
3. Lock the cable to the lower tube using cable clip.
Cable Clip
Loading ...
Loading ...
Loading ...