Loading ...
Loading ...
Loading ...
VIVOTEK
User's Manual - 59
Note that the
Preview
button has been cancelled, all changes made to image settings is directly
shown on screen. You can click
Restore
to recall the original settings without incorporating the
changes. When completed with the settings on this page, click
Save
to enable the setting. You
can also click on
Prole mode
to adjust all settings above in a tabbed window for special lighting
conditions.
Enable to apply these settings at:
Select the mode this prole to apply to: Day mode, Night mode, or
Schedule mode. Please manually enter a range of time if you choose Schedule mode. Then check
Save
to take effect.
Noise reduction
■ Enable noise reduction: Check to enable noise reduction in order to reduce noises and ickers
in image. This applies to the onboard 3D Noise Reduction feature. Use the pull-down menu to
adjust the reduction strength. Note that applying this function to the video channel will consume
system computing power.
3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light
condition with fast moving objects, trails of after-images may occur. You may then select a lower
strength level or disable the function.
LPC-parking lot
LPC-street
LPC-highway
In the
Conguration
>
Media
>
Image settings
page, select an application scenario, LPC
Highway, street, or parking lot mode. The related parameters, such as shutter time, will be
automatically changed for the scenario. LPC stands for License Plate Capture application.
Highlight mask
■ If there is a strong light source in your application, e.g., light pole, enable this function to avoid
negative interference.
Enable electronic image stabilizer
If you experience problems such as vibration on a pole mount, try enable the image stabilizer. •
EIS allows users to adjust focal length manually to enhance the EIS performance when connected
to manual lens
Loading ...
Loading ...
Loading ...