Loading ...
Loading ...
Loading ...
9
1
Drive Control Lever 10 Auger Blade
2
Chute Deflector Control 11 Skid Shoe
3
Drive Speed/Gear Control 12 Tire
4
Auger Control Lever 13 Belt Cover
5
Chute Rotation Handle 14 Electric Start Button
6
Clean Out Tool 15 Lower Handle
7
Discharge Chute Deflector 16 Recoil Start Handle
8
Discharge Chute 17 Handle Nut
9
Auger Housing 18 Oil Dipstick
19 Light
20 Choke Lever 22 Switch Key
21 Primer Bulb 23 Fuel Tank Cap
Drive Control Lever
Located on the right side of the upper handle, the Drive Control Handle is used to engage and
disengage the drive wheels. Squeeze the Drive Control Handle against the upper handle to engage the
wheels; release to disengage.
Drive Speed/Gear Control
The Speed/Gear Control is located on the left of the panel and is used to set the drive speed and
direction of travel. It can be moved into any of eight positions (six forward and two reverse gear
settings)
Auger Control Lever
Located on the left side of the upper handle, the Auger Control Handle is used to engage and
disengage the augers. Squeeze the Auger Control Handle to engage the augers; release to disengage
the augers.
Chute Rotation Handle
To adjust snow discharge direction, rotate the handle clockwise or counter-clockwise…. should
rotate 180 degrees.
Skid Shoe
Position the shoes based on the surface conditions. Adjust upward for hard-packed snow. Adjust
downward when operating on gravel or crushed rock surfaces.
Auger Blade and Impeller
When engaged, the auger blades rotate to cut snow and direct it into the auger/impeller housing to be
discharged out the chute.
Clean-out Tool
The chute Clean-out Tool is used to clean the chute assembly and chute opening when snow and ice
become lodged.
Loading ...
Loading ...
Loading ...