Liebherr CS2091 36 Inch Freestanding Bottom Freezer Refrigerator with Left Hinge, SuperCool, SuperFrost, Star-K Certification, Ice Maker, DuoCooling, German Engineering in Stainless Steel

User Manual - Page 14

For CS2091.

PDF File Manual, 28 pages, Read Online | Download pdf file

CS2091 photo
Loading ...
Loading ...
Loading ...
14
operaTion
= Temperature display mode
You can choose the unit of temperature for the display
in degrees Fahrenheit or degrees Celsius.
Note
The factory setting is degrees Fahrenheit.
How to change the temperature display to
degrees Celsius
Activate the setup mode by touching the Superfrost
icon for 5 seconds.
Touch the freezer compartment Down icon until
appears in the freezer temperature display.
Touch the Superfrost icon
- the display shows
Touch the Superfrost icon again
- the temperature reading is now displayed in degree
Celsius.
Exit setup mode by touching the freezer compartment
On/Off icon.
Note
To change the temperature display back to degrees
Fahrenheit, follow the steps above.
= Water quantity for Ice cube tray
If the produced ice cubes of the Ice Maker are too small,
the inflowing water quantity can be adjusted.
How to adjust the water quantity
Activate the setup mode by touching the Superfrost
icon for 5 seconds.
Touch the freezer compartment Down icon until
appears in the freezer temperature display.
Touch the Superfrost icon
- the display shows
• Touch freezer compartment Up icon
once only so
E 4 appears in the display.
IMPORTANT
Do not increase for more than one step. If the
adjusted value is too high the ice cube tray of the Ice
Maker could overflow.
Touch the Superfrost icon again.
Exit setup mode by touching the freezer compartment
On/Off icon.
Check the ice cube size within the next days. If the ice
cubes are still smaller as desired, follow the steps above
again.
Setup Mode - Figure 10
= Display brightness
How to adjust the display brightness
Activate the setup mode by touching the Superfrost
icon for 5 seconds.
Touch the freezer compartment Down icon until
appears in the freezer temperature display.
Touch the Superfrost icon
- the display shows
• Touch freezer compartment
Up/Down icons to select
0 = minimum to
5 = maximum brightness
Touch the Superfrost icon at the desired value.
Exit setup mode by touching the freezer compartment
On/Off icon.
Loading ...
Loading ...
Loading ...