Hikvision DS-K1T343EWX User Manual

Loading ...

Figure 10-2 Display the Selected Person(s) and Access Point(s)

Aer adding the access groups, you need to apply them to the access control device to take

eect.

1) Select the access group(s) to apply to the access control device.

2) Click Apply All to Devices start applying all the selected access group(s) to the access control

device or door staon.

3) Click Apply All to Devices or Apply Changes to Devices.

Apply All to Devices

This operaon will clear all the existed access groups of the selected devices and then

apply the new access group to the device.

Apply Changes to Devices

This operaon will not clear the existed access groups of the selected devices and only

apply the changed part of the selected access group(s) to the device(s).

4) View the applying status in the Status column or click Applying Status to view all the applied

access group(s).

Note

You can check Display Failure Only to lter the applying results.

The selected persons in the applied access groups will have the authorizaon to enter/exit the

selected doors/door staons with their linked card(s) or ngerprints.

Oponal: Click to edit the access group if necessary.

DS-K1T343 Series Face Recognion Terminal User Manual

140

Loading ...

Hikvision DS-K1T343EWX Value Series Face Access Terminal