Loading ...
Loading ...
Loading ...
Status of the device becomes Acve aer successful acvaon.
5.
Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP.
3) Input the admin password and click Modify to
acvate your IP address modicaon.
1.1.2
Acvate Camera via iVMS-4200
iVMS-4200 is a PC client to manage and operate your devices. Camera acvaon is supported by
the
soware.
Before You Start
●
Get the client soware from the supplied disk or the ocial website hp://
www.hikvision.com/en/ . Install the soware following the prompts.
●
The camera and the PC that runs the
soware should be in the same subnet.
Steps
1.
Run the client soware.
2.
Enter Device Management or Online Device.
3.
Check the device status from the device list, and select an
inacve camera.
4.
Click the Acvate.
5.
Create and
conrm the admin password of the camera.
Network Camera User Manual
2
Loading ...
Loading ...
Loading ...