Loading ...
Loading ...
Loading ...
The safety systems installed on your machine should be checked
before each machine use. Be sure that you have read the machine
operator manual and are familiar with the operation of the machine
before performing these safety system checks.
Use the following checkout procedures to check for normal operation
of machine.
If there is a malfunction during one of these procedures, do not
operate machine. See your authorized dealer for service.
Perform these tests in a clear open area. Keep bystanders away.
MP47322,00F4637-19-07JUN22
Testing Park Brake Switch
1.Park machine safely. (See Parking Safely in the Safety section.)
2.Sit on seat.
3.First test:
a. Move right motion control lever inward to the neutral position.
b. Turn key to the START position.
Result: Engine must not turn over. If engine turns over, there is a
problem with your safety interlock circuit.
4.Return right motion control lever to fully outward position.
5.Second Test:
a. Move left motion control lever inward to the neutral position.
b. Turn key to the START position.
Result: Engine must not turn over. If engine turns over, there is a
problem with your safety interlock circuit.
6.Return left motion control lever to fully outward position.
GH8XT3T,00009BA-19-13JUN22
Testing Park Brake
1. Park machine safely (See Parking Safely in the Safety section.)
2. Lock the park brake by moving the motion control levers fully
outward.
3. Engage bypass valve control.
4. Try to push machine manually.
Result: Park brake must prevent machine from moving. If machine
moves, see your authorized dealer for service.
NOTE: When testing is complete, disengage bypass valve control
prior to returning machine to service.
GH8XT3T,00009BB-19-10JUN22
Testing Mower Engagement (PTO) Switch
1. Park machine safely. (See Parking Safely in the Safety section.)
2. Sit on seat.
3. Lock the park brake by moving motion control levers fully outward.
4. Pull mower engagement (PTO) switch up to engage.
5. Turn key switch to the START position.
Result: Engine must not turn over. If engine turns over, there is a
problem with your safety interlock circuit.
H9PQBYK,0000043-19-10JUN22
Testing Seat Switch
1. Park machine safely. (See Parking Safely in the Safety section.)
2. First test:
a. Lock the park brake by moving the motion control levers fully
outward.
b. Sit on seat.
c. Start engine.
d. Move motion control levers inward to neutral position.
e. Pull mower engagement switch (PTO) up to engage.
f. Raise up slightly off the seat. Do not get off machine.
Result: The machine should stop. If engine does not stop,
there is a problem with your safety interlock circuit.
g. Return to sitting position in seat.
h. Return motion control levers to the fully outward position.
i. Push mower engagement switch (PTO) down to disengage.
j. Turn machine off.
3. Second test:
a. Lock the park brake by moving the motion control levers fully
outward.
b. Sit on seat.
c. Start engine.
d. Raise up slightly off the seat. Do not get off machine.
Result: Engine should continue to run. If engine stops, there is
a problem with your safety interlock circuit.
e. Return to sitting position in seat.
f. Turn machine off.
H9PQBYK,0000045-19-13JUN22
Using Park Brake
CAUTION: Avoid injury! Children or bystanders may attempt
to move or operate an unattended machine. Always lock the
park brake and remove the key before leaving the machine
unattended.
Locking Park Brake
APY536680—UN—27APR22
To lock the park brake, move motion control levers (A) fully outward.
Operating
18
Loading ...
Loading ...
Loading ...