Loading ...
Loading ...
Loading ...
RSE300, RSE600
Users Manual
4
LED Indicator
Table 3 explains what the colors on the LED indicator means.
Operation
The Imager and SmartView need a stable network connection to work properly. Set up your network without
interference from other systems. Do not connect the Imager to a Virtual Private Network (VPN). SmartView is a
data-intensive application. Use of other data-intensive applications (streaming audio or video) on the PC or the
same network system can cause loss of data.
Note
All thermal imagers need sufficient warm-up time for accurate temperature measurements and best
image quality. Warm-up time can vary by model and environmental conditions. Although most imagers
are fully warmed up in 3 minutes to 5 minutes, wait a minimum of 10 minutes for the most accurate
temperature measurement. When you move an imager between environments with large differences in
ambient temperature, allow for additional adjustment time.
To use the Product (See Figure 1):
1. Attach the antenna.
2. Stabilize the Product either on a flat surface or a tripod.
3. Connect the RJ45 connector end of the ethernet cable to the ethernet jack on the PC.
4. Connect the M12 connector end of the ethernet cable to the Product.
5. Connect the ac plug of the M16 DC power cable (15 V dc) to a power outlet and the M16 connector to the
Product.
6. Wait for the Product to warm up and the LED indicator to show solid green.
7. Remove the lens cover.
8. Use SmartView to focus the image.
Table 3. LED Indicator Light Colors
Color Description Action
Blinking red
The Product is warming up.
Or
There is no ethernet connection.
Wait for the Product to warm up.
Or
Connect the RJ45 connector end of the
ethernet cable to the ethernet switch and
the M12 connector end to the Product.
Solid red Indicates an error.
Solid green The Product is warmed-up. Use the Product.
Solid yellow
The internal temperature of the Product
is above the top threshold value.
Move the Product to a cool location.
Blinking yellow The shutter is closed NA
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...