Loading ...
Loading ...
Loading ...
2. Select the workstation that you want to add the camera to.
3. Click the Add Camera button.
4. Enter the following information:
Name: name of camera to help identify it.
Location: location of the camera, e.g. 1
st
floor lobby.
RTSP URL: the camera’s URL on the network. You can find it by using the
settings console provided by your IP camera or [ONVIF Device Manager].
Note: if you enabled ACC/PW in your camera settings, specify the URL in below
format: rtsp://ACC:PW@URL
Notes: if required, enter any notes for the camera in the field provided
5. Click the Add button to save the changes and add the camera.
Editing Added Cameras
To edit added camera, do this:
1. Click the Workstations & Cameras option.
2. Select the workstation where the camera was added.
3. Find the camera you want to edit in the list.
4. Change the camera status by toggling the switch right to turn monitoring on, or left to
turn it off.
Note: if an IP camera status is set to off, FaceMe won’t monitor the video stream of that
camera. However, the camera may still be on and recording to another VMS system (if
available and configured properly).
5. Click to edit a camera’s info, including its name, location, RSTP URL, or notes. Click
Save to save the changes.
6. Click return to the main Workstations & Cameras window.
Removing Added Cameras
To remove a camera from a workstation, do this:
1. Click the Workstations & Cameras option.
2. Select the workstation where the camera was added.
3. Find the camera you want to delete in the list.
4. If required, toggle the switch left to turn monitoring off.
5. Click the button to the right of the camera name.
6. Click Remove to confirm and remove the camera from the workstation.
7. Click return to the main Workstations & Cameras window.
Loading ...
Loading ...
Loading ...