Loading ...
Loading ...
Loading ...
5
INSTALLING THE ICE MAKER
CAUTIONS:
• The appliance shall not be exposed to rain even for the model with IPX4.
• This appliance is designed to expel hot air through the front vent.
This allows for installation in a recessed or built-in application, if
desired.
• Place your ice maker on a level surface that is strong enough to
support the ice maker when it is fully loaded. The unit will be
significantly heavier once it is operational and fully loaded. Level
your ice maker by adjusting the legs at the front of the ice maker.
• Place the ice maker away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the finish and heat sources may increase electrical consumption.
Extreme cold ambient temperatures may also cause the ice maker to malfunction. This ice maker
is designed for installation indoors in “room temperature” ambient conditions or outdoors in
covered areas not exposed to direct sunlight or rain (outdoor model only).
• Position the unit to allow unrestricted airflow through the
front grill, do not place the unit in the moist/humid areas.
Too much moisture in the air can cause frost to form
quickly on the evaporator which will require frequent
defrosting.
• Plug the ice maker into a professionally installed grounded wall
outlet. Do not under any circumstances cut or remove the third
(ground) prong from the power cord. Any questions concerning
power and/or grounding should be directed toward a certified
electrician.
Loading ...
Loading ...
Loading ...