Loading ...
Loading ...
Loading ...
Airborne Particle Counter
Operation
11
Buffered Data Menu
The Product can store 10,000 samples. To see the
Buffered Data:
1. Push .
2. Push until the Buffered Data Screen Menu icon
shows.
3. Push to see the buffered data samples.
4. To move through each sample, push or . Hold
down or to move through the samples faster.
Delete Records
From the Buffered Data Screen menu, you can erase all
of the samples:
1. Push to highlight
.
2. Push .
3. The Product gives you a selection to erase the data.
4. To erase the data, push to highlight
and push
. All data is erased.
To exit this menu, keep
highlighted and push .
The Product goes to the buffered data screen.
Setup Menus
There are two setup menus:
• Sample Setup
• Communication Setup
Use these menus and their submenus to configure the
Product.
Note
In the setup menus there is Help. To access
Help, use the Product buttons to highlight and
push
. An explanation of the setup menu is
shown. When completed, push to go back to
the previous menu.
Sample Setup Menu
To see the primary Sample Setup Menu:
1. Push .
2. Push until the Sample Setup Menu icon shows.
3. Push to go to the Sample Setup screen.
From this menu, you can set the parameters shown in
Table 7.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com
Loading ...
Loading ...
Loading ...