Smeg FS09ES Free standing refrigerator

User manual EN - Page 18

For FS09ES.

PDF File Manual, 21 pages, Download pdf file

Loading ...
Loading ...
Loading ...
EN - 18
energy e󰀩ciency class <F>.
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
The original packaging and foam may be
kept for re-transportation (optional).
Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
Remove all movable parts or x them
into the appliance against shocks
using bands when re-positioning or
transporting.
Always carry your appliance in the
upright position.
6.2 Repositioning the Door
It is not possible to change the opening
direction of your appliance door if door
handles are installed on the front surface
of the appliance door.
It is possible to change the opening
direction of the door on models with
handle on the side of the door or without
handles.
If the door-opening direction of your
appliance can be changed, contact the
nearest Authorised Service Centre to
change the opening direction.
7 BEFORE CALLING AFTER-
SALES SERVICE
If you are experiencing a problem with
your appliance, please check the following
before contacting the after-sales service.
Your appliance is not operating
Check if:
There is power
The plug is correctly placed in the socket
The plug fuse or the mains fuse has
blown
The socket is defective. To check this,
plug another working appliance into the
same socket.
The appliance performs poorly
Check if:
The appliance is overloaded
The appliance door is closed properly
There is any dust on the condenser
There is enough space near the rear and
side walls.
Your appliance is operating noisily
Normal noises
Cracking noise occurs:
During automatic defrosting
When the appliance is cooled
or warmed (due to expansion of
appliance material).
Short cracking noise occurs: When
the thermostat switches the compressor
on/o󰀨.
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
when it is rst activated.
Bubbling noise and splash occurs:
Due to the ow of the refrigerant in the
tubes of the system.
Water owing noise occurs: Due
to water owing to the evaporation
container. This noise is normal during
defrosting.
Air blowing noise occurs: In some
models during normal operation of the
system due to the circulation of air.
The edges of the appliance in contact
with the door joint are warm
Especially during summer (warm seasons),
the surfaces in contact with the door joint
may become warmer during the operation
of the compressor, this is normal.
Loading ...
Loading ...
Loading ...