1. Home
  2. Pure Enrichment
  3. Pure Enrichment PEHUMIDIF User Manual
  4. Page 10

Pure PEHUMIDIF Enrichment MistAire Ultrasonic Cool Mist Humidifier Quiet Air Humidifier

User Manual - Page 10

For PEHUMIDIF.

PDF File Manual, 12 pages, Read Online | Download pdf file

PEHUMIDIF photo
Loading ...
Loading ...
Loading ...
8 9
CLEANING (CONT'D)
If scale becomes difcult to remove with brush:
1. FilltheBasewith:mixtureof1tsp.whitevinegarand1tsp.water.
2. Let solution stand for 5 minutes.
3. With the vinegar in the base, clean all interior surfaces with a soft cloth
or brush to help remove scale.
4. Alsocheckmistnozzleandmisttubeinwatertank.Cleanasneeded.
5. Rinse the Base thoroughly with water to remove scale and vinegar
solution.
6. If minerals in your water are producing a white dust, you may use a
decalcicationcartridgeorhumidiercleanercartridgetokeepthe
tankclean.WerecommendPureEnrichment'sMistAireHumidier
DecalcicationCartridgeFilter(Model:PEHUMDCAL).Topurchase,visit
PureEnrichment.comorAmazon.
END OF SEASON STORAGE
• Follow the General Cleaning and Descaling instructions when the
humidierwillbestoredattheendoftheseason.
• Drythe humidiercompletelybefore storing.DONOTstorewithwater
inside the base or water tank.
• Pack the unit in its original carton and store in a cool, dry location.
NOTE: IF YOU EXPERIENCE A PROBLEM DO NOT ATTEMPT TO OPEN
THE MOTOR HOUSING BY YOURSELF. DOING SO MAY VOID YOUR
WARRANTY AND CAUSE DAMAGE TO THE HUMIDIFIER OR PERSONAL
INJURY.
TROUBLESHOOTING
If you are having problems with your humidifier, see if one of the solutions
below can resolve the problem before contacting the manufacturer.
Problem Solution
Mist and humidity
are not being produced.
Power plug:
Unplug and then try again.
Power Failure:
When power returns, try again.
Tank Installation:
Ensure tank is attached properly.
Dirty ultrasonic disk:
Cleandisk(seepg.9)
Air blows but mist is not
produced.
Excessive Water:
Pouroutextrawater.
Residue inside tank:
Wash tank and try again.
Dirty ultrasonic disk
:Cleandisk(seepg.9)
If you use hard water, replace with softer water.
Humidity level is low.
Dirty ultrasonic disk
:Cleandisk(seepg.9)
Water in unit is too cold:
Replace with cool water.
The humidity has a bad
smell.
Poor maintenance or dirty water:
Clean
humidierthoroughly,andllwithfreshwater.
White dust is forming on
nearby furniture.
Hard water may deposit a certain of dust:
Dust
in the air also settles because of added humidity
in the room. Use distilled water if it persists.
Unit has stopped working.
No or low water:
Unplugunitandrelltank.
Water is accumulating
outside of unit or area
surrounding unit.
Saturation of humidity:
Lower mist control
setting.
Unit not level and water is accumulating:
Unplug and place on level surface.
Point mist away from objects:
Raise unit on a
water-resistantlevelsurface2-3feetoffofoor.
Water dripping when
relling.
Water remaining on bottom of tank:
Wipe tank
or tilt to drain before transporting.
Increased noise level.
Unit must be placed on a flat, level, hard
surface:
Make sure it is NOT placed on a soft or
absorbent surface.
Red light on power dial.
Red LED light indicates low water:
Unplug and
relltank.
10 11
Loading ...
Loading ...