Loading ...
Loading ...
Loading ...
Toe Kick and
Ventilation Requirements
All Monolith ventilation takes place through the
Toe Kick area. Door panels must be a minimum of
4" (102 mm) above the floor. Do not block grill in
Toe Kick area.
Liebherr offers a 4" (102 mm) tall Toe Kick matching
the width of the Monolith columns, and possible
Side-by-Side combinations, as an accessory.
Please refer to page 59 for Toe Kick accessories
ranging from 18" to 72" width.
The Monolith appliance comes with dividers that
must be installed on the appliance and onto the
door, in order to separate the warm exhaust air
from the fresh incoming air.
Door Clearance Requirements
Monolith appliances are to be installed so the doors
(including handles) and adjacent cabinets, counter-
tops, walls, or other kitchen elements do not collide
with one another when doors open.
In case the door hits the wall or other cabinet, a
door limiter of 90° is included with the appliance.
The door opening angle is set to 115° at the plant,
but this can be reduced to 90° by simply inserting
the stable pin in the hinge.
Additional solutions include:
• Reduce the door panel thickness if it is larger
than 3/4" (19 mm).
• Rearrange the element that is colliding with the
appliance.
• Use a bumper or stopper to prevent the door
from damaging the adjoining wall or cabinet.
Panel clearance
Frameless installation style
Panel thickness 3/4" (19 mm)
Top view
A = 3/4" (19 mm) gable
B = Front panel door closed. 5/16" (8 mm) overlapping.
Dash line shows an overlapping of 7/8" (22 mm).
This overlapping is solely if the appliance is at the end of
a line of cabinets.
C = Front panel 90°
D = Front panel at max. door opening angle of 115°
A = Appliance housing
B = Front panel door closed
C = Front panel 90°
D = Front panel at max. door opening angle of 115°
Panel clearance
Panel thickness 3/4" (19 mm)
Top view
IMPORTANT
The gap between the appliance front panel and the surrounding furniture panels must be at least 1/8" (3 mm).
Inch in mm:
½" = 12.7 mm
1" = 25.4 mm
1 ½" = 38.1 mm
2" = 50.8 mm
Inch in mm:
½" = 12.7 mm
1" = 25.4 mm
1 ½" = 38.1 mm
2" = 50.8 mm
66 67
Loading ...