DS-2CD1183G0-IUF User Manual

Loading ...

Steps

Go to Conguraon → System → System Sengs → DST .

Check Enable DST.

Select Start Time, End Time and DST Bias.

Click Save.

2.9.14 Set RS-485

RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data

between the device and the computer or terminal when the communicaon distance is too long.

Before You Start

Connect the device and computer or terminal with RS-485 cable.

Steps

Go to Conguraon → System → System Sengs → RS-485 .

Set the RS-485 parameters.

Note

You should keep the parameters of the device and the computer or terminal all the same.

Click Save.

2.9.15 Set RS-232

RS-232 can be used to debug device or access peripheral device. RS-232 can realize communicaon

between the device and computer or terminal when the communicaon distance is short.

Before You Start

Connect the device to computer or terminal with RS-232 cable.

Steps

Go to Conguraon → System → System Sengs → RS-232 .

Set RS-232 parameters to match the device with computer or terminal.

Click Save.

2.9.16 Power Consumpon Mode

It is used to switch the power consumpon when the device is working.

Note

The funcon is only supported by certain camera models.

Go to Conguraon → Proacve Mode → Power Consumpon Mode , select the desired power

consumpon mode.

Network Camera User Manual

Loading ...

Hikvision DS-2CD1183G0-IUF 4K Built-in Mic Fixed Dome Network Camera