Loading ...
Loading ...
Loading ...
7
Description
The Spectra® Enhanced Series 7 of high-speed IP PTZ IR look-up cameras provide top tier image quality, performance, and
intelligent embedded features for state-of-the-art surveillance solutions. Low latency video and control make the camera
incredibly easy to control. Direct Drive closed loop control enables blazing pan and tilt speeds up to 450 degree/ second to
position the camera on target avoiding perceived PT delays so that critical forensic evidence is captured. Direct Drive closed
loop systems have advantages such as limited wear and tear and maintenance, silent, extremely accurate positioning, and the
camera always knows its position.
The Spectra Enhanced Series 7 IP PTZ IR look-up camera is easy to install, offers flexible mounting options, and uses a
standard Web browser for easy remote setup and administration.
The Spectra Enhanced Series 7 IP PTZ IR look-up camera easily connects to Pelco IP and hybrid systems such as
VideoXpert and Digital Sentry version 7.3 (or later). The camera also conforms with ONVIF Profile S, Profile G, and Profile T
for connection with third-party software. Pelco offers an Application Programming Interface (API) and Software Developer’s Kit
(SDK) for interfacing with Pelco’s IP cameras.
This document describes the installation and initial setup procedures to begin operating the camera. For more information
about operating your camera, refer to the operation manual specific to the product.
NOTE: For additional information about Spectra Enhanced 7 Series IR Look Up PTZ camera product documentation in English
and other languages, go to www.pelco.com and navigate to the Spectra Enhanced 7 Series IR Look Up website.
Getting Started
Before installing your device, thoroughly familiarize yourself with the information in the installation section of this manual.
NOTES
• Pelco recommends connecting the device to a network that uses Dynamic Host Configuration Protocol (DHCP)
server to address devices.
• To ensure secure access, place the device behind a firewall when it is connected to a network.
• Ensure power source used is 48VDC, 24VAC or PoE BT.
NOTE:
The product is intended to be supplied by a Listed Power Unit marked "L.P.S." (or "Limited Power Source")
and rated output:
24Vac, 50/60Hz, 4.3A, 48Vdc, 1.9A or PoE BT, 1.3A (S7230L-PW)
24Vac, 50/60Hz, 4.3A, 48Vdc, 1.9A or PoE BT,1.3A (S7820L-PW)
24 Vac, 50/60Hz, 4.3A, 48Vdc, 1.9A or PoE BT 1.3A (S7240L-PW)
The product shall be installed by a qualified service person and the installation shall conform to all local
codes.
If a Class I adapter or switch is used to provided power, be sure that the power cord is firmly plugged into
the socket and confirm the main earth connection.
Loading ...
Loading ...
Loading ...