Loading ...
Loading ...
Loading ...
5
Total Control 2.0
HDA-8100
Owner’s Manual
5
Total Control
HDA-8100
Owner’s Manual
Rear Panel Description
Below are the available connections on the rear of the HDA-8100:
1. LAN: Full duplex gigabit LAN (only), for audio streaming and zone control (Wi-Fi
NOT available, device must be hard-lined to the network.
2. Audio Inputs: The HDA-8100 Multi-Zone Amplier contains eight (8) inputs:
• Inputs 1-6: RCA (single ended) stereo inputs
• Inputs 7 & 8: Either RCA stereo input or Digital Coax input can be used.
This setting is congured within the Total Control programming software.
Inputs 7 and 8 can only be used as analog or digital, not both.
3. Assignable Preamplifier Outputs: Two (2) assignable preamplier outputs,
each with 12V programmable triggers are capable of 150mA of current.
4. Zone Speaker Outputs: Supports up to eight (8) stereo zones, 16 mono zones,
or any combination of stereo/mono zones (phoenix connector).
5. AC Main Power: Connect the supplied power cable to provide the HDA-8100
with power.
Slotted-styled screws are
used to secure the speaker wire
to the terminal block/phoenix
style connector.
1
2
3
5
4
Digital inputs down-mix a
Dolby 5.1 or DTS 5.1 bitstream
to stereo without any loss of
channel information.
Loading ...
Loading ...
Loading ...