Loading ...
Loading ...
Loading ...
2
1.2.3 Overview of Type III Camera
Main Body
Power Cord
Video Cable
Mounting
Base
Clip Plate
DC12 VIN
Enclosure
Figure 1-5 Type III Camera with Power over Coaxial
Cable
Main Body
Switch Button
Video Cable
Mounting
Base
Clip Plate
Enclosure
Power Cord
Figure 1-6 Type III Camera
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera, and the
mount.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole on the
ceiling/wall.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Attach the bracket to the ceiling/wall and secure the
camera with three PA4 × 25-SUS screws.
Figure 2-1 Fix the Camera to the Ceiling
Notes:
Loading ...
Loading ...
Loading ...