Loading ...
Loading ...
Loading ...
24
OPERATION
Time and Status Display
f
Display
• The display shows the settings, estimated remaining time, options, and status messages.
When the appliance is turned on, the default settings in the display will illuminate.
• While the load weight is sensed automatically, the display on the control panel blinks.
Description
a
Programme Status Indicators
• When a washing programme is running, LED for the active stage will blink, and the LEDs for
the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a
cycle is paused, the active stage LED will stop blinking.
b
AI DD
•
AI DD
M
provides the appropriate drum rotation actions after load sensing is completed.
•
M
is activated when the
AI Wash
programme is selected and operated.
- If too much detergent is used, too many suds can occur and this will cause poor
AI DD
performance.
c
Estimated Time Remaining
• When a washing programme is selected, the default time for that programme is displayed.
This time will change as options are selected.
• If the display shows
---
, then the time will be displayed after the load sensing has detected
the load size. This is normal.
• The time shown is only an estimate. This time is based on normal operating conditions.
Several external factors (load weight, room temperature, incoming water temperature, etc.)
can affect the actual time.
d
H
lights up when the programme starts and the door is locked.
e
z
lights up when the
Delay End
option is activated.
f
I
lights up when the
Pre Wash
option is activated.
g
G
lights up when the
Rinse+
option is activated.
Description
global_main.book.book Page 24 Tuesday, April 18, 2023 8:39 AM
Loading ...
Loading ...
Loading ...